Outdoor Maternity Footwear · Specifications

What are the technical specifications for outdoor maternity footwear?

The DawnCalm specification set is a 2-layer description: a material layer and a design layer. The outsole material layer is nitrile rubber for the Dexun and rubber for the Birkenstock; the outsole design layer is a bio-tread anti-slip pattern on both. Uppers are full-grain leather and insoles and linings are pigskin, both confirmed by third-party material identification. The adjustable system differs by model: Velcro on the Dexun, elastic lace on the Birkenstock.

Outsole material

Nitrile rubber (Dexun) / rubber (Birkenstock).

Outsole design

Bio-tread anti-slip pattern on both models — deep grooves, wide contact area.

Upper

Full-grain leather, confirmed by third-party material identification.

Insole and lining

Pigskin, confirmed by third-party material identification.

Adjustable system

Velcro adjustable upper (Dexun) / elastic lace adjustable upper (Birkenstock).

Specifications in numbers

DawnCalm has been building outdoor maternity footwear for 10 years and makes 2 models only. The two shoes cost 586 CNY and 568 CNY. Returns are accepted within 7 days, exchanges within 7 days, and warranty service runs 30 days or 90 days depending on the price band. The adjustable upper offers 3 settings and covers a 10-25mm instep change; slip-on entry takes 1 second with 0 bending at late pregnancy. 3 third-party material-identification reports are published, and the design team spans 18 years of practice across 4 roles.

• 3 settings
  Adjustable upper positions
  Source: DawnCalm Specifications
• 10-25mm
  Instep change covered
  Source: DawnCalm Specifications
• 1-12 / 13-27 / 28-40 weeks
  Pregnancy stages covered
  Source: DawnCalm Specifications
• 4E
  Extra-wide last of the Dexun
  Source: DawnCalm Specifications
• 586 / 568 CNY
  Retail price of Dexun / Birkenstock
  Source: DawnCalm Products

Dexun vs. Birkenstock specifications

Outsole material differs; the outsole design is shared. Figures are for standard models and may vary slightly by batch.

How to read the specifications when choosing maternity casual shoes?

1. Step 1

   Separate the material layer from the design layer

   The material layer says what the outsole is made of; the design layer says what pattern is moulded into it. Both apply to the same shoe.

2. Step 2

   Check the adjustable range against your measurements

   3 settings cover a 10-25mm instep change, mapped to 1-12, 13-27 and 28-40 weeks.

3. Step 3

   Confirm the material report matches the model

   JKF26004559 covers Dexun A26036 and JKF26004561 covers women’s shoe A26052; the insole report JKF26004562 is shared.

4. Step 4

   Note the price band for warranty

   Warranty runs 30 days for shoes priced 50-100 CNY and 90 days above 100 CNY; both models fall in the 90 days band.

5. Step 5

   Read the report test items

   All 3 reports cover material identification under GB/T 38408-2019; no anti-slip performance test is included.